5 Inch Touch Panel BMS Display JNFN ANT T50 Dual CAN 800x480 Cabinet Monitor
Product Details
5 Inch Touch Panel BMS Display
,Dual CAN 800x480 Cabinet Monitor
,BMS Accessories Touch Display
A cabinet-mounted energy storage system needs more than a three-digit state of charge readout. When a commissioning engineer is standing in front of a module, the useful screen is the one that shows the cell voltage histogram, the temperature map and the last fifty events in the same place. The JNFN ANT T50 is a five inch capacitive touch panel that does exactly that: 800 x 480 resolution, dual CAN ports so it can sit on the pack bus and the site bus at once, an 8 to 90 V input range, and a flat bezel that mounts through a rectangular cutout in a cabinet door.
Touch interaction is what separates this unit from a simple indicator. Parameter groups can be browsed and, with an authorisation code, adjusted in the field: current limits, balancing thresholds, alarm setpoints and the display language. The change is logged with a timestamp against the parameter name, so a commissioning record exists without anyone writing it down.
- Five Inch Capacitive Touch Panel: 800 x 480 resolution with a hardened glass surface, responsive through a work glove — the practical requirement on a commissioning floor.
- Cell Voltage Histogram and Temperature Map: All series voltages are drawn as a bar chart against the pack average, so a drifting group is visible in one glance instead of requiring a page of numbers to be scanned.
- Dual CAN Ports Plus RS485: One CAN port faces the pack bus and the other faces the site controller, with the RS485 port available for a legacy device — all running simultaneously.
- Guarded Parameter Editing: Field edits require an authorisation code and are written to an event log with a timestamp, which turns an informal adjustment into a documented record.
- 500-Event Alarm Log: Alarms and warnings are stored with cell snapshot, temperature and current at the moment of the event, so a fault that cleared overnight can still be examined in the morning.
- 8 to 90 V Wide Supply: Runs directly from a 24 V, 48 V or 72 V pack auxiliary output without an external converter, and tolerates the transients present on a switching bus.
- Flat Panel Mount Bezel: A 150 x 100 mm cutout with a sealed gasket keeps the cabinet's IP rating intact once the door is closed.
| Display Size | 5.0 inch capacitive touch, 800 x 480 |
|---|---|
| Panel Type | IPS, 500 nits, hardened glass |
| Supply Voltage | 8 V to 90 V DC, 0.5 A typical |
| Interfaces | 2 x CAN 2.0B, RS485, USB service port |
| Data Views | SOC and SOH, cell histogram, temperature map, current, event log |
| Event Storage | 500 events with fault snapshot |
| Parameter Editing | Authorisation-code protected, logged |
| Cutout Size | 150 x 100 mm |
| Front Protection | IP54 with gasket |
| Operating Temperature | -20 °C to +70 °C |
Commercial and industrial storage cabinets, containerised systems and telecom backup installations are the intended fit, particularly where commissioning staff need to verify cell behaviour without opening a laptop. The panel also suits marine installations where a helm station wants a full pack view rather than a gauge.
Service teams use the event log during a warranty discussion, because a fault snapshot from the moment of the trip is more persuasive than a description written from memory a week later.
Delivery includes the panel, a mounting gasket, a screw kit, a USB service cable and a 2 m CAN and RS485 harness. Units are tested for touch linearity, backlight uniformity and supply transient tolerance before packing.
Ordering: Samples from one piece; OEM branding and start-up screen customisation from fifty. Screen layouts can be adjusted for a project's parameter set. A 24-month limited warranty covers the display module.
Mr. Yu
Sales Director
- Email: liangyu1@jnfnbms.com
- Tel: 18625172489
- WhatsApp: 8613424898729
-
WeChat:
18625172489
